Uphole Equipment

WINCH SPECIFICATION

Motor Power - 220 VAC/1850 RPM/0.3 HP

Speed Cable - 0 - 20 meter/minute
Reducer ratio - 1:60


Cable -3/16” - 4 Conductors
78 ohm/km
Double Twisted Steel Armored


Cable Breaking Strength - 13.7 kN

Capacity - 250 m
Cable length 150 - 250 m*)
Dimension - 60 cm x 50 cm x 45 cm
Weight - 47 kg


*) Available Cable Length up to 1600 m

   with difference dimension, weight & power

Winch_New.pdf



DATALOGGER SPECIFICATION

Pentium III or IV Compatible, min speed 500 MHz

Minimum RAM 128 MB 
Under Microsoft Windows 98/NT/2000/Me/XP/ Vista/ 7/ 8
Standard UART Serial Port or USB min speed 19200 bps


Number of Channels

6 CH for Downhole Equipments, using Telemetry
1 CH Depth Encoder (100 - 1000 pulse per revolusion)
3 CH Surface Input (Analog signal)


Power Source 220 VAC/2 Amp

PS Output for Downhole Equipment 24VDC


Dimension - 255 mm x 195 mm x 85 8m

Weight - 1.2 kg

DataLogger_New.pdf



Uphole Equipment

WINCH SPECIFICATION Motor Power - 220 VAC/1850 RPM/0.3 HP Speed Cable - 0 - 20 meter/minute Reducer ratio - 1:60 Cable -3/16” - 4 Conductors 78 ohm/km Double Twisted Steel Armored Cable Breaking Strength - 13.7 kN Capacity - 250 m Cable length 150 - 250 m*) Dimension - 60 cm x 50 cm x 45 cm Weight - 47 kg *) Available Cable…

 

selengkapnya

Downhole Equipment

Gamma High Sense Caliper Long Spaced Density Short Spaced Density Temperature (optional) Total Lenght 2740 mm Weight 22 kg   Gamma High Sense Long Spaced Neutron Casing Colar Locator Fast Response Temperature Total Lenght 2450 mm Weight 16 kg Gamma(optional) Long Normal 64” Short Normal 16”SP Lenght 2680 mm Weight…

 

selengkapnya